Two (2) Retainers
These things are heavy duty and cut just right! They're going to make my conversion much easier.
Heavy made spring mounts but factory mount are offset to keep spring away from the tire . Yours are centered with frame leaving little clearance between rear tire and spring.
I bought these for the back of my tj. I didn't use the retainer that they sent along. I opted to built a centering pin out of d.o.m. tube and incorporate my bump stop into that.
The fitment was nice and clean. Bought lots of ballistic link mounts and bracketry and been happy with everything I received.
Solid, heavy, beefy! Just what you want out of a coil spring perch. Installed these at the same time as repairing the frame on my TJ. Welded up nicely with a fluxcore and are solid. Only downside, if there is one, having a hard time coming up with a bumpstops solution.
Worked like a charm and built like a tank. Used on a TJ with rotted out OEM mounts. If I had to do it again I would purchase the flat bracket for universal width. The upturned pieces on the 2.5" set needed to be cut off to work for me due to lack of body lift on my TJ (there was interference).