Coil Plate Mounts with Retainers
CNC Laser Cute and Press Formed
Coil mount with formed axle mounts and inner gussets. Coil plate, retainer, and gusset laser cut from 1/4" plate. Bolt hole d...
Coil Spring Frame Mounts And Retainers
CNC Laser Cut and Press Formed
Use this bracket to mount your coil springs to any square / flat surface including but not limited to frames or rockwell axl...
Coil Spring Plate
For Custom Suspension
If you are adding a custom coil spring suspension to your rig, save time and money with these coil spring plates. Coil spring plate recommended for ...
Coil Spring Retainer
Don't Lose A Spring On The Trail
Coil spring retainer recommended for 5.5" TJ coils or equivalent. Cut from .250" steel, laser cut to .5". Part # BRK-1060
PRICE INCLU...
Coilover / Shock Towers
Simple And Strong
Coil-over / shock towers are cut from .250" and CNC bent for a precise fit. A "backbone" is integrated into the design by bending the plate three times,...
CNC machined in house from 1018 cold roll steel, these arms all feature 10 degree tierod end angle correction to lengthen the life of the joints. Passenger arm is two inches longer to allow e...
CNC machined in house from 1018 cold roll steel, these arms all feature 10 degree tierod end angle correction to lengthen the life of the joints. Passenger arm is two inches longer to allow e...
Reid Racing HD Dana 44 Flat Top Knuckles
Chevy/Jeep spindle bolt pattern accepts "outers" from all open knuckle Chevy and Jeep Dana 44, Dana 30, and 10-bolt front ends to 1986
Cast from high str...
Dana 60 High Steer Kit For Kingpin Axles
Better Design, Better Clearance
After market bronze bushings require trimming to fit.
Most modern solid axle equipped trucks and Jeeps are equipped wi...
Dana 60 Springless Cap Conversion Kit
Zinc Plated for corrosion resistance, no need to paint
Dana 60 kingpin springless cap conversion kit. Replace caps for kingpin knuckles with this spr...
Reid Racing Heavy Duty Dana 60 Kingpin Knuckles
The strongest Dana 60 knuckles on the market
Cast from high strength ductile iron
Beefed up with extra material and ribbing
100% interchangeable w...
Reid Racing Heavy Duty Dana 60 Kingpin Knuckles
The strongest Dana 60 knuckles on the market
Cast from high strength ductile iron
Beefed up with extra material and ribbing
100% interchangeable w...
Dana 30 Differential Cover with Drain Plug
Welded 3/8" Steel
Dana 30 Differential Cover. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8" flange resists pu...
Dana 35 Differential Cover
Welded 3/8" Steel
Dana 35 Differential Cover. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8" flange resists pulling off of the s...
Dana 44 Coilover / Shock Mounts / Gussets
Coil Over or Shock mount / gussets for the Dana 44 knuckle made from 1/4" steel (4 pieces): The gussets distribute force exerted by the coil over’s ...
Dana 44 Differential Cover
Welded 3/8" Steel
Dana 44 Differential Cover made from 3/8" steel. CNC Laser cut and CNC Press formed 8 times from one piece. The ultra thick 3/8" flange resists pulli...
Dana 44 High Steer Space 1"
Clear Springs and Rocks
Dana 44 High Steer Spacer 1.0" thick for use with High Steer Arms to clear leaf springs or for higher tie rod clearance. 4-hole design for ...
Dana 44 High Steer Space 1/2"
Clear Springs and Rocks
Dana 44 High Steer Spacer 0.5" thick for use with High Steer Arms to clear leaf springs or for higher tie rod clearance. 4-hole design fo...
Dana 44 High Steer Stud Kit
Strong Studs for Your Dana 44
Dana 44 High Steer Stud kit includes ONE stud, ONE conical washer, and ONE locking nut. For use to replace factory studs or add an ad...
100% Machined In the U.S.
Using Domestic and Imported Materials
4140 Hardened Chromoly Housing and Spanner Nut
Hardened 416 Stainless Steel Ball
Polyurethane Races manufactured by Prothane
Adj...
Lower Axle Link Brackets
CNC Laser Cut and Press Formed
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease...
Axle tube Shock bracket
Strong mounts In a simple design
Coil Over / Shock mount boxed design. Cut from 3/16" plate for a .5" boltMounting width for shock is 1.50" and Coped for 3.0" axle tube b...
Single Poly Bushing with DOM Sleeve
Weldable 1/4" thick housing!
Single poly bushing with 2.5" or 3" overall mounting width and 1.50" minor diameter 1.75" major diameter and 2.0" OD Heavy Dut...
High Clearance Shock Tabs
When Space Is Limited
High Clearance Shock Tabs. For use with shocks, coilovers, and air shocks. Made from .250" steel with a 1/2" bolt diameter. Available for moun...
